LoRaScope

A single-radio LoRa / MeshCore / LoRaWAN spectrum and traffic analyser I designed and build.

LoRaScope — see what's actually on the air

A single-radio analyser that listens to the LoRa band and tells you what's really happening on it — live capture, packet decode, and link health in one tool.

Visit the LoRaScope Site

Overview

LoRaScope is a product I designed, build, and consult around. It captures LoRa traffic live, decodes packets, and turns raw airtime into a clear picture of your spectrum — who’s talking, how often, and whether the link is healthy. It works at the radio layer directly, so you can debug a site even where there is no LoRaWAN network server and no gateway to log into.

One analyser covers every flavour of LoRa — LoRaWAN, LoRaBASIC, MeshCore, and more — all through the same interface.

What it does

Capture & decode

Match a sender’s sync word, spreading factor, bandwidth, and coding rate, and LoRaScope decodes raw frames the moment they hit the radio — no gateway, no join, no network server. Save them to a capture store to filter, search, export, and replay later.

Spectrum & link health

Turn live airtime into a readable picture — RSSI, SNR, source, payload, collisions, and duty cycle — so problems on a busy or marginal band become obvious instead of guessed at.

Emulate & inject

Pretend to be the hub, or any node. Inject and emulate traffic to test a node in isolation, reproduce a fault, or validate firmware — without disrupting production hardware.

Agent & script control

The live feed and the controls are exposed over telnet and REST, so a script — or an AI agent — can monitor, reason, act, and observe in a loop. See AI & Automation.